What is the principle and application of blowing nozzles?

The chemical properties of pesticides depend on the methods of use recommended by chemical manufacturers. It is very important to choose the right nozzle and use the correct method of operation.

Careful cleaning of clogged nozzles can prolong the service life of the nozzles and enhance the effectiveness of the nozzles. In order to ensure the spray effect of the nozzle, the nozzle of each nozzle is carefully carved. Even the damage caused by improper cleaning may affect the flow rate and spray distribution. In the process of use, be sure to use enough filters and spray systems to reduce clogging.

If the nozzle does become clogged, you can only clean it with a soft brush or toothpick and be very careful during the cleaning process. Even using a wooden toothpick to clean the nozzle buckle may distort the orifice.

The nozzle is the source of gas protection for the welding gun. The shape of the nozzle has a great influence on the airflow movement. Commonly used nozzle shapes are cylindrical and conical.

Nozzles are widely used in the industry, materials ranging from stainless steel, plastics to silicon carbide, polytetrafluoroethylene, PP (engineering plastics), aluminum alloys and tungsten steel, etc. The application range is generally used in automobiles, electroplating, surface treatment, high-pressure cleaning , Dust removal, cooling, desulfurization, humidification, mixing, gardening and other industries. Wide angle nozzle

The nozzle fittings include pipe threaded fittings, solenoid valves and liquid filters and pressure gauge fittings.

The main manufacturing material of pipe threaded joints is stainless steel, and the threaded connection can be divided into internal threaded connection and external threaded connection. This type of joint is mostly used to connect pipelines in construction, water conservancy projects, and bridge construction.

The solenoid valve is also a nozzle fitting, with an internal threaded connection port. The valve body of the solenoid valve is usually made of stainless steel and brass. Its piston structure is special, with high wear resistance, and it will not produce any noise during operation. The material of the seal is nitrile rubber or fluorinated rubber. The valve action can be divided into direct-acting, stepwise direct-acting, and pilot-operated. Its connection mode has two-way type and two-position three-way type. It is mainly used in industries such as air compressors, bottle blowing machines, fire safety, stage equipment, food equipment, and cleaning equipment. Anti-sun nozzle

The liquid filter has a detachable guide cup, which has filter meshes of various sizes. Its characteristic is that when it needs to be cleaned, it only needs to take out the detachable filter cartridge, remove the impurities, and reinstall it, so its use and maintenance are extremely convenient. Liquid filter is suitable for steam, air, water, oil and other system pipelines. It can protect various measuring instruments, pumps, valves and various nozzle equipment.

The joints of the pressure gauge and the parts in contact with liquids are made of brass, which are mainly used to measure the pressure of gases or liquids that are non-corrosive and non-explosive to copper and copper alloys, and are not easy to crystallize and precipitate. This kind of instrument requires vertical installation and stable load.