Hello! Welcome to the official website of Shenzhen qixingyuan mechanical equipment Co., Ltd!

National Service Hotline

15994761342(Wind knife business)

0755-27201304(Other accessories)

Your current location : home >> News >> Technical Information

ContactContact Us

Shenzhen Qixingyuan Machinery Equipment Co., Ltd.



Web: www.szqx01.com


Add.:Room 1117, 11th Floor, Building A, Tangshang Building, Xinqiao Street, Baoan District, Shenzhen

Add.:1st Floor, Building 8, Wanfeng Second Industrial Zone, Shajing Street, Baoan District, Shenzhen

The nut manufacturer tells you what a nut is?

2021-09-21 12:00:00

A nut, also known as a nut (English: Nut), is a fixing tool with a hole in the center and a thread on the inside of the hole. Nuts are often shared with screws of the same size to fix related joints. If environmental factors such as vibration cause the nut to loosen, you can use glue or pins and other tools to further strengthen the relevant part. The nuts are mostly hexagonal, followed by squares. m3 nut

1. A nut is a nut, which is screwed together with a bolt or screw for fastening. A component that must be used in all production and manufacturing machinery is divided into carbon steel, stainless steel, and non-ferrous metals (such as copper). ) And other major types. According to attributes, there are mainly national standards (GB), German standards (DIN), international standards (ISO), Japanese standards (JIS), American standards (ASTM/ANSI) and other standards. Among them, the national standard, the German standard, and the Japanese standard are represented by M (for example, M8, M16), while the American system and the British system are represented by fractions or # (such as 8#, 10#, 1/4, 3/8).

Water pump nut

2. Nuts are parts that tightly connect mechanical equipment. Through the inner thread, nuts and bolts of the same specification can be connected together. For example, M4-P0.7 nuts can only be connected with M4-P0.7 series bolts ( In the nut, M4 means that the inner diameter of the nut is about 4mm, and 0.7 means that the distance between the two threads is 0.7mm); the same is true for American products, for example, 1/4-20 nuts can only be used with 1/4-20 screw rods. Match (1/4 means that the inner diameter of the nut is approximately 0.25 inches, 20 means that there are 20 teeth in each inch). High-strength nut

Main species

Stainless steel, self-locking nut, lock nut, lock nut, four-claw nut, screw-in nut safety nut, thin rod screw connection nut, self-locking hexagonal cap nut special anchor nut, hexagonal crown thin nut ring nut.

Fine pitch all-metal hexagonal flange lock nuts, all-metal hexagonal flange lock nuts, fine pitch non-metallic insert hexagonal flange lock nuts, fine pitch hexagonal flange nuts.



Shenzhen Qixingyuan Machinery Equipment Co., Ltd. copyright
Record No:粤ICP备2021109928号

Home            About            Products            News            Case

Solution     Message        Contact us        China           English

  • E-mail:sale02@szqx01.com

  • TEL:0755-27201304

  • QQ:1459900890

  • add.: 1st Floor, Building 8, No. 27, Wunipeng Road, Third Industrial Zone, Wanfeng Community, Xinqiao Street, Baoan District, Shenzhen

Wind knife manufacturers

Scan code consultation